Service
Solar Care
- About
- Equipment
- Benefits
- FAQs
Dirty Solar Panels Can Significantly Reduce Energy Production
Solar panels need clear, unobstructed surfaces to absorb as much sunlight as possible. Dust, air pollution, pollen, soot, bird droppings and other contaminants can build up on the panels and reduce their energy-generating performance.
Rain, wind and condensation alone are not sufficient to effectively clean solar panels. Regular professional cleaning is essential to help maintain consistent energy production.
Professional and Specialized Solar Panel Cleaning
Solar panels require a clean, unobstructed surface to operate efficiently. Over time, dust, air pollution, pollen, soot, bird droppings and other contaminants can accumulate on the panels, reducing the amount of sunlight reaching the photovoltaic surface and affecting energy production.
In the Philippines, solar panels are exposed to a combination of intense sunlight, high humidity, heavy rainfall, airborne dust and pollution. While rain may remove some loose dirt, it does not provide the mechanical cleaning required to remove stubborn or ingrained contamination.
Regular Professional Cleaning Helps Maximize Solar Output
To achieve a consistently high electricity yield, solar panels should be cleaned regularly using effective methods and equipment specifically designed for photovoltaic systems.
Simply rinsing panels with water is often not enough. Research has shown that mechanical brushing and appropriately pressurized water provide more effective cleaning results than non-pressurized water alone.
The Only Company Offering This Specialized Cleaning Service
GES is the only company offering this professional and specialized solar panel cleaning service, using purpose-designed cleaning equipment and professional techniques specifically suited to photovoltaic systems.
Our approach is focused not simply on washing the panels, but on carefully removing the types of dirt and deposits that can accumulate on solar modules while helping protect the panels and their surrounding components.
Designed for the Philippine Environment
The Philippines’ tropical environment can create conditions where contaminants accumulate on solar modules. During dry periods, airborne dust and pollution can settle on panel surfaces, while humidity and rainfall can contribute to deposits becoming more difficult to remove.
Solar installations located near:
- Busy roads and traffic
- Construction sites
- Industrial areas
- Commercial centers
- Areas with significant airborne pollution
- Agricultural or dusty environments
may experience faster accumulation of surface contamination.
Heavy rain can wash away some loose particles, but it should not be considered a substitute for professional cleaning. Stubborn deposits, bird droppings, pollution residue and ingrained dust may remain on the panels.
Specialized Equipment for Safe and Effective Cleaning
We use professional cleaning equipment designed to thoroughly clean solar panels while protecting their delicate surfaces.
Our water-driven rotating brushes are suitable for both small and large photovoltaic installations.
- Soft nylon bristles gently remove fine dust and surface film
- Rotating brush heads provide effective mechanical cleaning
- Low-pressure operation helps minimize the risk of panel damage
- Suitable for elevated and difficult-to-access installations
Our telescopic lances can extend up to 14 metres, allowing us to reach panels across a range of installation layouts.
This enables us to:
- Clean difficult-to-reach areas safely
- Avoid stepping directly on solar panels
- Cover large areas efficiently
- Maintain a consistent cleaning standard across the installation
We use specialist cleaning solution formulated for photovoltaic systems to remove stubborn and ingrained contamination, including:
- Bird droppings
- Pollen
- Soot
- Dust
- Greasy deposits
- General atmospheric pollution
The cleaning process is designed to provide a streak-free, residue-free finish while reducing the risk of rapid re-soiling.
Solar panel cleaning is not limited to the glass surface. Mould, moss and algae can also develop around visible panel frames and surrounding areas.
We use appropriate low-pressure cleaning techniques and safe working distances to remove this organic growth while protecting the solar installation.
Rooftop and elevated solar panel cleaning requires specialist equipment, appropriate procedures and careful attention to working-at-height safety.
Where required, our technicians use suitable fall-protection equipment, including safety harnesses and secure attachment systems, to help ensure safe working conditions throughout the cleaning process.
Keep Your Solar Investment Working Efficiently
Regular professional cleaning helps remove performance-reducing contamination and keeps your solar installation operating at its best.
Safe Access and Professional Cleaning
Solar panels should not be treated like ordinary glass surfaces. Improper cleaning methods, excessive pressure, abrasive materials or walking directly on panels can potentially cause damage.
Where rooftop access is required, appropriate safety procedures and equipment are used. Our cleaning methods are designed to eliminate the need for personnel to step on solar modules.
Why Professional Solar Panel Cleaning Matters
Regular professional cleaning can help maintain the condition and performance of solar installations by removing accumulated dirt and pollution that ordinary rainfall may not remove.
For systems exposed to significant dust, traffic pollution, construction activity or other airborne contaminants, professional cleaning can be particularly important.
Cleaner panels. Better light transmission. More consistent energy generation.
With GES’s specialized solar panel cleaning service, your solar investment receives professional cleaning specifically designed for photovoltaic systems and the environmental conditions found in the Philippines.
Frequently Asked Questions
Dust, pollution, pollen, soot, bird droppings and other contaminants can build up on solar panels and reduce the amount of sunlight reaching the photovoltaic cells. Regular cleaning helps maintain efficient energy generation and protect your investment.
Rain can remove some loose dirt, but it is not enough to effectively clean solar panels. Rain, wind and condensation do not provide the mechanical action required to remove ingrained dust, pollution, bird droppings and other deposits.
Research shows that two months of exposure to air pollution alone can reduce energy yield by approximately 6.5%. Where dust is allowed to accumulate on the panel surface, energy losses can increase to up to 40% under the tested conditions.
The actual impact will vary depending on the environment, type of contamination, weather conditions and length of time between cleanings.
Solar panels can accumulate a wide range of contaminants, including:
- Fine and coarse dust
- Concrete and brick dust
- Coal dust
- Rice dust and husk
- Chalk and respirable dust
- Pollen
- Soot
- Bird droppings
- Grease and ingrained dirt
- Moss, mold and algae
Not usually. Research has shown that simply pouring non-pressurized water over photovoltaic panels does not provide the same cleaning effectiveness as mechanical brushing combined with appropriately controlled water pressure.
Our cleaning methods are designed to physically remove contaminants while treating the panel surface carefully.
Our specialist cleaning equipment uses soft nylon bristles specifically designed for gentle cleaning. The brushes operate at controlled pressure to remove dirt without unnecessarily stressing or scratching the panel surface.
We use controlled water pressure appropriate for the solar panel and cleaning application, together with specialist soft brushes. The objective is effective cleaning without exposing the modules to unnecessarily high pressure.
Yes. We use specialist telescopic cleaning equipment that can reach elevated solar installations without technicians having to step directly onto the panels.
Our telescopic lances can extend up to 14 metres, depending on the equipment and site requirements.
No. Our telescopic cleaning systems allow us to access many elevated and difficult-to-reach panels from a safe working position, helping avoid unnecessary foot traffic on the panels which may damage some.
Yes. Our specialized cleaning process is designed to remove stubborn and ingrained contamination, including bird droppings, pollen, soot, dust and greasy deposits.
Our cleaning process is designed to leave the panels streak-free and free from unwanted residue and limescale deposits. Appropriate cleaning products and techniques are selected according to the installation and level of contamination.
Yes. Moss, mold and algae can accumulate around solar panel frames and other visible areas of an installation. We use appropriate low-pressure cleaning techniques and safe working distances to treat these areas.
The ideal cleaning frequency depends on the location and surrounding environment. Solar installations exposed to high levels of dust, pollution, construction activity, agriculture, pollen or bird activity may require more frequent cleaning.
A regular cleaning program can help prevent contamination from building up and affecting energy generation.
Yes, when carried out using appropriate equipment, procedures and safety precautions. Rooftop cleaning requires particular attention to working-at-height safety.
Where required, our technicians use suitable fall-protection equipment, including safety harnesses and secure attachment systems.
Cleaning removes dust, dirt and other contaminants that can obstruct sunlight reaching the photovoltaic cells. By keeping the panels clean, you help maintain their ability to generate electricity efficiently.
The actual improvement will depend on how heavily contaminated the panels were before cleaning and the conditions of the installation.
Professional cleaning uses the right equipment, cleaning methods and safety procedures for photovoltaic installations.
Our approach combines soft rotating brushes, controlled water pressure, telescopic cleaning systems and specialist cleaning products to provide an effective clean while protecting the panels.
Regular cleaning helps prevent the long-term accumulation of dirt and organic growth while supporting consistent energy generation and maintaining the appearance of your solar installation.
Clean panels can help your solar investment perform at its best.
Contact us to discuss your solar installation and cleaning requirements. We can assess the system, access requirements and level of contamination and recommend an appropriate cleaning approach.
Solar panels in the Philippines are continuously exposed to airborne dust and pollution from vehicle emissions, construction activities, industrial operations and other urban sources. Fine particles, soot and other pollutants can settle on the surface of solar panels and gradually form a layer of contamination.
This pollution can reduce the amount of sunlight reaching the photovoltaic cells, potentially lowering the system’s energy yield. When pollution combines with dust, moisture and other contaminants, it can also create deposits that are more difficult to remove through rainfall alone.
For solar installations in areas with significant traffic, construction or industrial activity, regular professional cleaning can help remove accumulated pollution and maintain a cleaner panel surface for more efficient solar energy generation.